2 hours of soldering, with not the prettiest ESC to motors connections because of space constraints. CC3D flight controller has menu select for "reversing motor rotation" so doesn't matter how the 3-wires connect.
Note convenient use of frame posts to hold ESC's.
Need to always reference this, so putting this here.
Each ESC had ~4-5g of wires coming off, so ESC weight assumption was high.
I may save a couple more grams when I shorten those ESC control wires and removing ground.
(No ground looping to ESC!!)
Surprisingly, overall matches to the original loose weight tally up to this point, which mean we on track to be overweight!
| MY BUILD | ||||
| Descriptions | Qty | Unit Weight g | Total Weight g | |
| DTI Blade 180 Frame | 1 | 24 | 24 | |
| DYS 1306 3100KV motors | 4 | 13 | 52 | |
| AFRO RACE MINI 20A ESC | (Bullet connectors will come off, will be much lighter) | 4 | 10.7 | 42.8 |
| CC3D Flight Controller | ATOM | 0 | 8 | 0 |
| OrangeRX R410X | 0 | 2.7 | 0 | |
| Micro FPV camera | Eachine 600TVL | 0 | 12 | 0 |
| Video Transmitter | Eachine ET200 | 0 | 7 | 0 |
| Vid TX Antenna | Dipole | 0 | 6 | 0 |
| Batt | 3s 800mah | 0 | 80 | 0 |
| Gemfan 4x4.5 | 5mm Hub | 0 | 5 | 0 |
| 118.8 |
Hoping for saving weight on the remainder components, with mods.
No comments:
Post a Comment