Mini Quad Build > Indoor FPV Test Flight

Setup:
Diatone Blade 180
DYS BX1306
Afro 20A Race SimonK (OneShot enabled)
CC3D Atom with DRonin (Autotuned Tau = 20.40 as flown)
3s 850mah
ET200 VTX
600TVL 1/4 1.8mm CMOS 170deg camera
AUW = 235g

Eachine RC832 VRX
UTV700 EasyCap USB video capture

Mini Quad Build > CC3D Atom Mount / OrangeRX Satellite R111XN

CC3D Atom with the 3.3v source for the satellite RX power source.
Epoxy wire strain relief.

Ground pad next to 3.3v left open for future bootloader flash jump.

CC3D Atom in the STL printed mount from Ebay.  STL mount required "working the plastics" to make fit.  Cutoff already there for 3.3v wire!
 
Note to self on STL PCB mounts: relieve all sharp inner corners.

OrangeRX Satellite with "test length" harness. Shorten later for correct length.

Mini Quad Build > CC3D Atom Mount

CC3D Atom Mount from someone printing on Ebay. 
(Have not test fitted the PCB yet.)

This is about same as the original CC3D Atom case:

But there is now a mounting solution on the 30.5 x 30.5 pattern.